This is a radio screw hole repair kit for the 1984-1996 Jeep Cherokee XJ and 1986-1992 Jeep Comanche MJ. The plastic tab that holds the spring nut can break off of the dash and leave you with no way to fasten the radio to the dash. These will slide onto the lip around the edge of the hole and allow the radio to be mounted properly again. These include new screws and nuts mounted inside the plastic to create a strong mounting point. If both sides aren’t broken you can either only install one or cut the other side out and install both so you have secure mounts on both sides. That’s up to you. These are only available in a kit of 2.
INSTALLATION:
1. Test fit the repair clips to ensure they fit all the way onto the lip.
2. Cleanup any remaining plastic bits in the square hole that used to hold the spring nut. This often breaks off completely so there may be no cleanup necessary.
3. Once happy with the fitment, put a little CA (cyanoacrylate) AKA super glue, or any other form of plastics glue you prefer on the inside edges of the clip and push it into place. A LITTLE GOES A LONG WAY!! You want just enough to make it stay, don’t put so much it squishes out around the edges.
4. Once the glue is dry, you can reinstall the radio using the new screws.
***DISCLAIMER***
– These are printed in black PETG plastic. This plastic has natural UV resistance so the color won’t fade over time and won’t get brittle. This plastic can start to get soft at temperatures of 190*F. Even in extreme environments this shouldn’t be an issue. PETG parts have been used on vehicles for long periods of time without Ill effects.
– This is a 3D printed part, this means not all parts will appear or fit exactly the same. I do not accept returns due to it being made to order, however If you have an issue with your part, please contact me and we can work out the issue together.
– If you break it due to not following instructions, over-tightening screws, or through use, you can fix it with some super glue or you can message me to purchase a replacement part.
– This is a made to order part. I print and ship as soon as possible, please allow ample time for me to process and ship.
– Shipping damage must be reported within 3 days of receiving the item. After this time a return/refund will not be accepted nor will a replacement part be sent out due to shipping damage.
