This is a cubby hole radio delete kit for the 1984-1996 Jeep Cherokee XJ and 1986-1992 Jeep Comanche MJ. There are 2 sizes of cubby available. The STANDARD size is 4-1/2″ (114 mm) deep and the LARGE size is 7-1/4″ (184 mm) deep. They are both 7-5/8″ (194 mm) wide and 2-5/8″ (67 mm) tall. The large one takes some wiggling to get it into the dash but it will fit.
INSTALLATION:
1. Remove the dash trim panel. Its a pain to get it around the steering column but it can be done.
2. Remove the old radio if present.
3. Install the cubby in the dash. It goes in with the logo and part number facing up towards the windshield.
4. Reinstall the dash trim panel.
***DISCLAIMER***
– These are printed in black PETG plastic. This plastic has natural UV resistance so the color won’t fade over time and won’t get brittle. This plastic can start to get soft at temperatures of 190*F. Even in extreme environments this shouldn’t be an issue. PETG parts have been used on vehicles for long periods of time without Ill effects.
– This is a 3D printed part, this means not all parts will appear or fit exactly the same. I do not accept returns due to it being made to order, however If you have an issue with your part, please contact me and we can work out the issue together.
– If you break it due to not following instructions, over-tightening screws, or through use, you can fix it with some super glue or you can message me to purchase a replacement part.
– This is a made to order part. I print and ship as soon as possible, please allow ample time for me to process and ship.
– Shipping damage must be reported within 3 days of receiving the item. After this time a return/refund will not be accepted nor will a replacement part be sent out due to shipping damage.
