This is a 3D printed poop bag dispenser that holds up to 5 rolls of standard poop bags and has another roll ready to go when you pull that last bag. After the roll is emptied, the center tube will fall out the bottom and the next roll will drop down and be ready to use. It only requires one hand to operate so you can keep a hand on your leash or quickly grab a bag as you walk by. It has mounting points in the back designed for screws/nails as well as a channel for a ziptie. This allows for easy mounting to a wall or fence post.
*BAGS NOT INCLUDED*
Instructions:
- To load the dispenser, simply slide the lid forward to remove it from the dispenser.
- Remove the sticker on each roll and load them with the flap coming under and up from the backside of the roll (reference the symbol on the dispenser).
- With all (or some) of the rolls loaded, reinstall the lid and use a finger to rotate the bottom roll around to feed the bag out of the slot.
- Once the roll is empty, the center tube will fall out and the next roll can be spun so the bag feeds out of the slot.
- If the center tube doesn’t fall out on its own, simply poke the next roll and it should dislodge it and drop the next roll into place.
Thank you!
***DISCLAIMER***
– These are printed in black PETG plastic. This plastic can start to get soft at temperatures of 190*F. Even in extreme environments this shouldn’t be an issue.
– This is a 3D printed part, this means not all parts will appear or fit exactly the same. I do not accept returns due to it being made to order, however If you have an issue with your part, please contact me and we can work out the issue together.
– This is a made to order part, I print and ship as soon as possible but please allow for time for me to process and ship.
– Shipping damage must be reported within 3 days of receiving the item. After this time a return/refund will not be accepted nor will a replacement part be sent out due to shipping damage.
